Engine

Spring Metal Inlet Rocker Clip Shown As Number 11 In Diagram. Fits DFM / DFSK Loadhopper Models with 1300cc Engine.

Oil Filter. Fits DFM / DFSK Loadhopper Models With 1000cc And 1300cc Engines. IMPORTANT:- WE RECOMMEND OIL AND FILTER CHANGES AT EVERY 6000 MILES AND 4000 MILES FOR DELIVERY/ CATERING VEHICLES.

OAT Pink Antifreeze/Summer Coolant Concentrate 5 Litres. Gives 5 Years Protection. Fits DFM / DFSK Loadhopper Models With 1000cc/1200cc/1300cc Engines. IMPORTANT:- DO NOT MIX WITH OTHER ANTIFREEZE TYPES.FLUSH SYSTEM WITH CLEAN WATER IF UNSURE.

PVC Valve. Fits In Upper Engine Camshaft Cover. Fits DFM / DFSK Loadhopper Models with 1300cc Engine

PVC Valve Seating Seal. Fits In Upper Engine Camshaft Cover. Fits DFM / DFSK Loadhopper Models with 1300cc Engine

Alloy Reinforcing Bracket Engine To Transmission On Right Side. Shown As Item Number 4 In Diagram. Fits DFM / DFSK Loadhopper Models With A 1300cc Engine.

Throttle Body Gasket. Fits DFM / DFSK Loadhopper Models With 1300cc Engine

Water Inlet Metal Pipe And "O" Ring. Fits Into Rear Of Water Pump Housing. Fits DFM / DFSK Loadhopper Models With 1300cc Engine. IMPORTANT:- REMOVAL OF INTAKE MANIFOLD IS REQUIRED TO FIT THIS ITEM. YOU WILL ALSO NEED TO ORDER "ENGINE MANIFOLD INTAKE GASKET 10021E

Water Inlet Metal Pipe "O" Ring Shown As Number 10 In Diagram. Fits Into Rear Of Water Pump Housing. Fits DFM / DFSK Loadhopper Models With 1300cc Engine. IMPORTANT:- REMOVAL OF INTAKE MANIFOLD IS REQUIRED TO FIT THIS ITEM. YOU WILL ALSO NEED TO ORDER "ENGINE MANIFOLD INTAKE GASKET 10021E-A"

Engine Water Pump Drive Pulley. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Camshaft Speed Sensor Housing Gasket. Fits DFM / DFSK Loadhopper Models with 1300cc Engine

TELEPHONE ORDERING ONLY. Complete Engine Cylinder Head Assembly. Ready To Fit. These Are New Units and Comes With Camshaft, Valves, Rockers etc. Fits DFM / DFSK Models With A 1300cc Engine. TELEPHONE ORDERING ONLY. IMPORTANT:- WE RECOMMEND THAT ORGANIC ANTI-FREEZE IS USED WITHIN THE COOLING SYSTEM.FAILURE TO DO SO MAY RESULT IN PREMATURE COOLING SYSTEM COMPONANT FAILURE.DO NOT MIX ORGANIC AND NON ORGANIC TOGETHER.

Engine Cylinder Head Gasket Fits DFM / DFSK Loadhopper Models With a 1300cc Engine. IMPORTANT:-SOME FACTORY CYLINDER HEADS ARE FITTED WITH 3 X CORE PLUGS BELOW ROCKER SHAFT WHICH CAN CORRODE AND BECOME POROUS ALLOWING COOLING FLUID TO CONTAMINATE ENGINE OIL!! CARE MUST BE TAKEN WHEN REPLACEING HEAD GASKET AS IT CAN BE FITTED THE INCORRECT WAY AROUND CAUSING OIL STARVATION TO THE CAMSHAFT.WE ALSO RECOMMEND IN ALL CASES THAT THE CYLINDER HEAD IS PRESSURE TESTED AND SKIMMED BEFORE REFITTING.HEAD BOLTS TO BE TORQUE CHECKED AT 500 MILES THEREAFTER.USE ONLY OAT(ORGANIC ACID TECHNOLOGY)ANTIFREEZE.

Engine Gasket / Seal Set. Includes All Gaskets And Seals Required When Rebuilding Cylinder Head Or Engine Assembly. Fits DFM / DFSK Loadhopper Models with 1300cc Engine. IMPORTANT:- FITTING INSTRUCTIONS SUPPLIED WITH SET.

TELEPHONE ORDERING ONLY. Engine Assembly New Unit. (Without Ancillaries) Fitted With Water Pump, Timing Belt/Tensioner,Oil Filter And All Necessary Gaskets. Fits DFM / DFSK Models Loadhopper Models With 1300cc Engine. IMPORTANT:- 12 MONTHS PARTS WARRANTY ON THIS ITEM.WITHIN 14 DAYS YOU WILL NEED TO SEND/EMAIL US A COPY OF ENGINE FITMENT INVOICE SHOWING VEHICLE REGISTRATION NUMBER AND MILEAGE. IN THE EVENT OF A WARRANTY ISSUE YOU WILL BE REQUIRIED TO PROVIDE US WITH DOCUMENTS RELATING TO VEHICLE SERVICE INVOICING AS PER MANUFACTURES SCHEDULE WITH THE EXCEPTION OF OIL AND FILTER CHANGES. WE RECOMMEND OIL AND FILTER CHANGES ON GENERAL USE VEHICLES EVERY 6000 MILES AND 4000 MILES ON DELIVERY/CATERING VEHICLES. WARRANTY IS VOID IF THERE IS EVIDENCE OF ENGINE RUNNING AT ABOVE NORMAL TEMPERATURE CONDITIONS AND NON ORGANIC ANTI-FREEZE HAS BEEN USED. WE RECOMMEND THAT ORGANIC ANTI-FREEZE TO BE USED WITHIN THE COOLING SYSTEM.FAILURE TO DO SO MAY RESULT IN PREMATURE COOLING SYSTEM COMPONANT FAILURE. DO NOT MIX ORGANIC AND NON ORGANIC TOGETHER.

Rubber Camshaft Cover Gasket/Seal. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Head Bolt Engine Set Of 10. Required When Refitting/Replacing Engine Cylinder Head. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Cylinder Head To Block Locating Dowel. Required When Refitting/Replacing Engine Cylinder Head. Shown As Number 15 In Diagram. Fits DFM / DFSK Loadhopper Models With 1000cc And 1300cc Engine.

Engine Exhaust Manifold gasket. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Engine Intake Manifold gasket. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Engine Oil Dipstick. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Engine Oil Pump. Fits DFM / DFSK Models With 1300cc Engine.

Engine Oil Pump Gasket. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Engine Piston Kit. Comes With Rings/Pins And Clips (Standard Bore Size) (supplied as set of 4). Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Engine Sump Oil Pick Up Pipe. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Cylinder Head Rear Coolant Chamber Cover Plate "O" Ring. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Set of 4 Oil Seals, Located under Camshaft Cover For Sealing Spark Plug Access Chamber. Fits DFM / DFSK Loadhopper Models With 1300cc Engine

Valve Collet. Shown As Number 18 In Diagram. Order 2 x Per Valve. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Metal Cup Core Plug That is Located Below Camshaft. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.

Hand Held Engine Diagnostic Scanner. Reads / Deletes codes. Shows Component Running Data etc. DOES NOT SCAN AIR BAG/ABS SYSTEMS. Fits all DFM/DFSK Loadhopper Models With 1000cc/ 1200cc/ 1300cc Engines. THESE SCANNERS ARE SUPPLIED DIRECT TO US BY THE MANUFACTURE.. BEWARE OF COPIES!!!