Pedal Rubber For Brake And Clutch Pedals. Shown As Number 19 In Diagram. Fits DFM / DFSK Loadhopper Models With 1000cc /1200cc/ 1300cc Engines. Price is For 1 x Rubber
Clutch Cable. Shown As Item Number 2 In Diagram. Fits DFSK C35/C37 Van/Minibus Models With 1500cc DK15-06 Engine. TELEPHONE ORDERING ONLY. Cable Number Required.
Clip For Securing Upper Part of Clutch Cable In Vehicle Cabin. Shown As Number 6 In The Diagram. Fits DFM / DFSK Loadhopper Models With 1000cc And 1300cc Engines
Clutch Release Bearing. Shown As Number 9 In The Diagram. Fits DFM / DFSK Loadhopper Models With a 1300cc Engine And "C" Series Vehicles With 1500cc Engine.
Repair Kit Includes Clutch Release Fork And All Springs. Shown As Numbers 4,7,8 And 10 In Diagram. Fits DFM / DFSK Loadhopper Models With 1300cc Engine.
"C" Clip For Securing Upper Part of Gear Change Cables. Shown As Number 8 In Diagram. Fits DFM / DFSK Loadhopper Models With 1000cc /1200cc/ 1300cc Engines.
TELEPHONE ORDERING ONLY.
5 Speed New Unit. Fits DFM / DFSK Loadhopper Models With A 1300cc Engine. IMPORTANT:- GEARBOX OIL MUST BE CHANGED AT FIRST 1000 MILES AND EVERY 12 MONTHS THEREAFTER. FILL WITH 75W/80W OIL AND FILL UNTIL OIL FLOWS OUT OF LEVEL CHECK PLUG .IN THE EVENT OF A WARRANTY CLAIM DOCUMENTORY EVIDENCE WILL NEED TO BE PROVIDED SHOWING MILEAGE/ DATE UNIT FITTED AND OIL CHANGE DATE/MILEAGE INTERVALS
Gearshift Cable Set. Consisting of Both Upper and Side Cables. Shown As Numbers 3 And 4 In Diagram. Fits DFM / DFSK Loadhopper Models With A 1300cc Engine.
IMPORTANT: WHEN REPLACING GEARSHIFT CABLES EXAMINE GEARLEVER BRACKET ASSEMBLY. BRACKETS CAN FRACTURE IN THE AREA OF WHERE CABLES MOUNT AND CAUSE GEAR SELECTION PROBLEMS!
Brake-Clutch Pedal Box Assembly. Shown As Numbers 14-25 (3) In Diagram. Comes With Pedal Rubbers And Brake Light Switch. Fits DFM / DFSK Models With 1000cc/1200cc/ 1300cc Engines.
Differential Unit For Rear Axle. Ready To Fit. Fits DFM / DFSK Loadhopper Models With A 1300cc Engine.
IMPORTANT:- DO NOT UNDER ANY CIRCUMSTANCES MOVE PINION NUTS TAGGED POSITION.
New Revised Differential Unit For Rear Axle. Fits DFSK "C" Series Models With 1500cc Engine And 43:9 Diff Ratio. THIS DIFF IS BOLTED TO FRONT OF AXLE CASING.
IMPORTANT:- DO NOT UNDER ANY CIRCUMSTANCES MOVE PINION NUTS TAGGED POSITION.
Rear Axle Half Shaft. Shown As Number 14 In Diagram. Wheel Studs Not Fitted. WHEEL BEARING KIT OEM1001397/T WILL ALSO BE REQUIRED WHEN FITTING THIS PART. Fits DFM / DFSK Loadhopper Models With 1000cc/1200cc/1300cc Engines. FOR ABS BRAKES NEW ABS RING WILL BE REQUIRED PART NUMBER (TO BE ADVISED)
Rear Wheel Bearing Kit. Consisting Of Collar, Seal, Spacer, Oil Seal Dock And Premium Manufactured Bearing. Shown As Numbers 4,5,6,11,20 In Diagram. Fits DFM / DFSK Loadhopper Models With 1000cc /1200cc/1300cc Engines.
IMPORTANT
FOR ABS K01H 1200cc VEHICLES YOU WILL NEED TO ORDER ALSO 1002334T ABS COLLAR AND RING.
IMPORTANT:-COLLAR MUST NOT BE HEATED. COLLAR MUST BE PRESSED ON COLD.
Rear Wheel Bearing Kit. Consisting Of Collar, Seal, Spacer, Oil Seal Dock, ABS Ring and Bearing. Shown As Numbers 4,5,6,11,20 In Diagram. Fit DFSK C35/C37 Models With 1500cc Engines
IMPORTANT: -COLLAR MUST NOT BE HEATED. COLLAR MUST BE PRESSED ON COLD.